Wet & Forget Outdoor Mould, Lichen & Algae Remover

Every 2 litre pack yields 12 litres of product to spray. Using a garden sprayer or one of our Thrust One Sprayers you will get coverage of between 20 - 60 square metres. Some surfaces e.g. painted surfaces will use less but porous surfaces readily absorb the product and therefore coverage could be in the range of 20-30sq m.

Every 5 litre pack yields 30 litres of product to spray. Using a garden sprayer or one of our Thrust One Sprayers you will get coverage of between 100 - 300 square metres. Some surfaces e.g. painted surfaces will use less but porous surfaces readily absorb the product and therefore coverage could be in the range of 100-150sq m.

Yes. For instance if the contamination is extreme, increase the strength for a quicker reaction. However, if you have cleaned the surface previously with Wet & Forget and you want to give it just a maintenance spray, you can decrease the strength if the contamination is light. The cleaning process will still be as effective.

Wet & Forget can be used on an extensive range of outdoor surfaces including tarmac, concrete, decking, roof tiles, Artificial Grass, Astroturf, bowling greens, bricks and paving, canvas tents, caravans, static caravans, caravan awnings, motorhomes, conservatories, fibreglass boats, greenhouses, golf greens, limestone, sandstone, marble, outdoor furniture, outdoor pots, outdoor painted surfaces, pool surrounds, shade sails, slate, solar panels, tennis courts, yacht sails.

Ideally, remove any excess debris. We don’t recommend washing the surface prior to application as Wet & Forget must be applied to a dry surface.

On a cool dry windless day, when no rain is expected for 4-5 hours. Often the evening is best when evaporation of the product is minimal. This will ensure that the surface to be treated stays wet with Wet & Forget for an extended period.

Once the surface is clean and dry, you can paint or stain over Wet & Forget. Wet & Forget is great for extending the life of the painted surface as it not only removes moss, mould, lichen and algae, but also the surfactant action helps remove dirt and other residue that could cause fading or chipped paint.

Spraying your outdoor house surfaces annually with Wet & Forget will extend the life of your paint and keep paving looking fresh and new.

Thoroughly saturate the surface with Wet & Forget on a cool, dry day. Late in the day is best. Leave the growth to start decomposing for 2-3 weeks (the longer the better!) then prior to painting or staining, gently pressure wash the surface - growth, dirt and residue will come off faster and easier. The surface will also be sterile reducing possible contamination of the new paint with algae and fungi.

No, Wet & Forget is fine if left in the spray container as it does not deteriorate or go off when it has been diluted. Plus it will not damage your garden sprayer as the product is not corrosive.

Although Wet & Forget doesn’t contain bleach or ammonia we recommend keeping your animals off the treated surface until it is dry, to ensure they don't ingest any of the product. If they accidentally walk or sit in the product wash their feet and bottoms with fresh water as a precaution.

Not unless you are directly spraying it onto the plants. If you accidentally do this, then rinse the plants down with water from the hose, or better still, protect them with paper or plastic to avoid overspray.

Wet & Forget has an unlimited shelf life so it will last forever in its container! Natural light does not damage the efficiency of the product. For safety, always keep the cap on tightly and the container out of reach of children.

How long Wet & Forget takes to work is totally dependent on the intensity of the contamination of mould, algae or lichen. For mild contaminations, results can be seen in days. For more stubborn infestations Wet & Forget can take approximately 2-3 months to see improvements.

In very severe cases of contamination it may take 6-12 months to work. The good news is that when Wet & Forget is used again the following season, the clean up results will occur within weeks!

Most definitely! But if your deck is older and has never been cleaned, it may be noticeably blackened with the contamination. In this case, it would be advantageous to wait a month after the application of Wet & Forget and give the area a light brush with a broom or scrubbing brush with warm water to remove it. The good news is that you should only have to do this once and then the maintenance becomes so easy.

Absolutely! To remove moss on grass first water the infected area lightly being sure not to saturate the moss. Do this late in the day when the sun is low so that evaporation is kept to a minimum. At worst you may get slight burning on the grass but it will recover very quickly.

Dilute the solution using 7 parts water to 1 part Wet & Forget formula and spot spray the moss. It may take a couple of goes until you have the contaminated areas covered. Give Wet & Forget some time to tackle the moss and then rake the dead moss out.

To help your grass recover from the moss infestation provide the area with garden lime to change the ph levels. If it's early spring or autumn, overseeding and fertilising should do the trick.

Generally, for most applications you want to get a good mix between water and Wet & Forget. A ratio of 5 parts water to 1 part Wet and Forget will usually suffice.

When applying Wet and Forget it’s important to get an even coating on your desired surface. Try and use a garden sprayer (or one of our Thrust One Sprayer models) to ensure you’re getting a good coating every time.

If you are applying Wet and Forget to an outdoor surface such as a patio, deck or driveway, always do so in dry conditions. Applying the solution in warm, dry weather when it hasn’t rained for several days. If it rains 4-5 hours after you apply the Wet and Forget, you will need to reapply once it is dry again.

Depending on how porous the surface is, you may need to apply Wet and Forget more often. It’s worth checking the surface for any signs of regrowth regularly, especially during the wetter, colder months. For most applications, using wet and forget once per year should suffice.

The major advantage of using Wet and Forget is the fact that it will not damage the surface you are applying it to. Common cleaners containing bleach can often damage surfaces, but Wet and Forget contains no bleach, ammonia or harmful chemicals and therefore won’t damage surface areas. It is very fast to apply, all you have to do is wet the surface and forget it!

In comparison to harsh jet washers, which can leave marks or even take chunks out of softer surfaces, the application of Wet & Forget is gentler so will not damage surfaces.

Make sure you apply Wet and Forget on a dry day, without any rain for at least 4-5 hours (summer months with the least chance of rain are preferable). Always use 5 parts water and 1 part Wet and Forget. Apply using a garden sprayer or as liberally as possible to get an even coverage.

You can easily use Wet & Forget to clean a tiled pool surface once it has been drained as long as it has been left to dry prior to application.

Wet & Forget Rapid With Sniper Nozzle is a fast and convenient way to apply our product to effectively clean large outdoor areas such as swimming pools. Simply click onto your hosepipe and it will automatically mix with the water allowing you to spray 200m2.

Make sure to apply the solution on a dry day, without any rain for 4-5 hours after application.

To clean the surrounding paving, use the same method of application and apply overnight to ensure you don’t have a slippery surface whilst it is in use.

The easiest way to clean roofs, large areas and hard to reach places is with the help of our Wet & Forget Rapid With Sniper Nozzle. The efficient Sniper Nozzle can spray up to 8 metres high - perfect for helping to reach difficult areas! All you have to do is click it onto your hosepipe and it will automatically mix with the water for you.

Due to their location, it is often hard to judge how much Wet & Forget is needed for cleaning roofs. So always overestimate how much Wet and Forget you will need.

A 150 metre-squared area (which is an average for a 3-bedroom house) would normally just require 1x 5 litre bottle, but due to the undulations in the roof, it’s best to use 2x 5 litre bottles.

Try our Wet & Forget Rapid With Sniper Nozzle to tackle those tough to reach places! Our efficient nozzle can reach up to 8 metres high - perfect for tackling those tough-to-reach places!

Yes! It will clean biological growth away from the window frames. However, we’d recommend using Wet & Forget Window for cleaning your window glass. Applying Wet & Forget Window is super easy and can be applied in a few simple steps.

Yes, certainly. Be sure to have enough Wet & Forget before you start! A full pitch should need up to 4x 5 litre bottles. For AstroTurf pitches that are sand-filled or sand-dressed, make sure the pitch is liberally soaked with water.

For dealing with black fungi, leave Wet and Forget on for up to 2-4 weeks and use a sweeper to pick up dehydrated fungi off the surface. The protective nature of Wet & Forget means that the AstroTurf won’t become contaminated until up to year after initial application.

Wet & Forget is often used by schools, colleges and universities to keep their exteriors, paths and outdoor facilities clean. Wet & Forget’s soft chemical formula means that old buildings won’t be harmed in the cleaning process.

Wet & Forget contains no bleach, ammonia or harmful chemicals so you can clean happy knowing that it won’t damage your outdoor surfaces.

On first application Wet & Forget may turn concrete an orangey brown colour. This reaction is completely normal and shows that Wet & Forget is doing its job! The discoloration will dissipate over a short period of time and is not permanent or harmful.